>

Enter Your Email To Sign Up
For Our E-Newsletter:


Home > Dodge > Dodge 5.9L Cummins 89-93 > Transmission Automatic
Sort By:
1 2
DTT BILLET BAND ANCHOR
DTT BILLET BAND ANCHOR
Our Price: $22.00
ON LINE ORDERING COMING SOON CALL 1-866-504-4002 TO ORDER

A727/ 46RH/46RE/ SRT10/47RH/47RE/48RE
Holds the second gear band in place securely will not bend.
DTT APPLY LEVER
DTT APPLY LEVER
Our Price: $44.00
ON LINE ORDERING COMING SOON CALL 1-866-504-4002 TO ORDER

The  apply lever applies 2nd gear. 2nd gear in the 47RE is a band that wraps around the front drum. This drum is spinning in first gear and when the band applies and stops this drum, you are now in 2nd gear.

There is a piston (servo) that fills with hydraulic fluid to apply the band. The  apply lever is in between the piston and the band itself. It acts like a pry bar. It causes a mechanical advantage.
DTT ACCUMULATOR
DTT ACCUMULATOR
Our Price: $44.00
ON LINE ORDERING COMING SOON CALL 1-866-504-4002 TO ORDER

A727/ 46RH/46RE/ SRT10/47RH/47RE/48RE
The accumulators function is to assist with sealing the transmission for increased transmission life. The OEM accumulator is plastic and more easily distort creating leakage.
DTT’s accumulator is made from billet aluminum therefore offering much less distortion than the plastic OEM version.  DTT ‘s accumulator installs easily, its low  cost is an added bonus and the increased line pressure benefits makes it a must do when trying to obtain maximum longevity.
DTT SERVO
DTT SERVO
Our Price: $115.00
ON LINE ORDERING COMING SOON CALL 1-866-504-4002 TO ORDER

727/518/ 47 RH/ 47 RE/ 48RE

TRANSMISSIONS LIVE AND DIE BY PRESSURE !

The main purpose of the DTT BILLET SERVO SYSTEM is to stop leakage in the 2nd gear and 3rd gear system. Eventually all transmissions will develop a certain amount of leakage. This can be caused by oil condition, mileage and especially the metal sealing rings used in many aftermarket systems and OEM that cause case wear in the bore.  

Of the hundreds of OEM and aftermarket transmissions DTT tested, leakage was evident and did vary above Chrysler specifications. Most of the actual leakage DTT found was caused by worn cases and worn servo covers.

How the system works is that when the 2nd gear servo applies your band, the centre of the OEM factory servo cover gets worn down creating leakage. As the leakage increases your 3rd gear holding capacity will decrease. It is not a question of does your cover leak; it’s a question of how much does it leak.
The DTT SERVO Cover utilizes a bushing and a lip seal preventing any leakage through the servo cover.
This innovative DTT SERVO design is unique as it utilizes custom lap jointed Teflon designed sealing rings that seals up the bore as the unit heats up, resulting in maximum sealing capacity resulting in increased longevity.
Valve Body Kit
Valve Body Kit
Our Price: $199.00
ON LINE ORDERING COMING SOON CALL 1-866-504-4002 TO ORDER

All DTT Valve Body Kits are designed for maximum holding capacity, while engineered to be installed by those with good mechanical skills.  We provide you with an affordable option to build your valve body, just like a full DTT  unit. VOLTAGE REGULATOR REQUIRED WITH THIS UPGRADE: VREG $80.00
Pan Off Upgrade Stage 1
Pan Off Upgrade Stage 1
Our Price: $225.00
ON LINE ORDERING COMING SOON CALL 1-866-504-4002 TO ORDER

This kit is designed for those looking to upgrade there transmissions on a budget and without having to remove the transmission. We designed this kit for those who are NOT looking to upgrade the Valve Body or already have Valve Body upgrades. For those looking to also upgrade the VB, you should look at DTT Stage 2 kit.

This kit includes:
DTT Billet Servo
DTT Billet Accumulator
DTT Billet Band Strut
DTT Billet Band Anchor
Deep Transmission Pan Powdercoated Black
Deep Transmission Pan Powdercoated Black
List Price: $255.00
Our Price: $245.00
ON LINE ORDERING COMING SOON CALL 1-866-504-4002 TO ORDER

This Deep transmission pan increases oil capacity by approx. 2qts, adds rigidity to the transmission case. Has a drain plug for easy maintanence, and a temperature port to make checking transmission temperatures a simple job.
Our pans include: Gasket and Hardware.
Pan Off Upgrade Stage 2
Pan Off Upgrade Stage 2
Our Price: $435.00
ON LINE ORDERING COMING SOON CALL 1-866-504-4002 TO ORDER

This kit is designed for those looking to upgrade there transmissions on a budget and without having to remove the transmission. We designed this kit for those who are  looking to upgrade the Valve Body.
***VOLTAGE REGULATOR IS REQUIRED WITH THIS KIT   Part # DTTVREG   $67.00***

This kit includes:

DTT HD Valve Body Kit
DTT Billet Servo
DTT Billet Accumulator
DTT Billet Band Strut
DTT Billet Band Anchor


*****1996-2004.5 Dodge Cummins should purchase a DTT Voltage Regulator for $67.00 to avoid 2nd or 3rd gear starts******
*****2005-2007 Dodge Cummins may require DTT Voltage Regulator, these trucks seem to vary*******
DTT MASTERKIT (94-95)
DTT MASTERKIT (94-95)
Our Price: $595.00
ON LINE ORDERING COMING SOON CALL 1-866-504-4002 TO ORDER

WHY CHOOSE DTT MASTER KIT: DTT ‘S MASTER KITS ARE ASSEMBLED ARE WITH LONGEVITY IN MIND. At DTT we compile your kits based on the trucks application. Street & Strip, Off-road performance trucks, towing trucks, Baja trucks, Sled Pulling trucks to name a few. Many of you have multipurpose vehicles and we consider that carefully. DTT Master kit contains a special designed 3rd gear Billet Piston. This unique Piston’s design affords larger surface area for better clutch apply. DTT custom piston design also offers an additional spring pocket resulting in even piston lifting in the 3rd gear drum. DTT ‘S Precision Builders Kit: Includes CUSTOM DTT 3RD GEAR PISTON and precision ground pressure plate, clutches , steels, extensive high quality seal kit, 2nd gear band , pump bushing, drum bushing .*picture not exactly as shown*
ALL MASTERKITS HAVE A $ 20 - 3RD GEAR PRESSURE PLATE CORE CHARGE / ANY PLATES RETURNED MUST HAVE A TRACKING & PROOF OF DELIVERY
DTT STAGE 2 MASTER REBUILD KIT
DTT STAGE 2 MASTER REBUILD KIT
Our Price: $798.00
ON LINE ORDERING COMING SOON CALL 1-866-504-4002 TO ORDER

A727/46RH/46RE/SRT10/47RH/47RE/48RE DTT ‘S MASTER KITS ARE ASSEMBLED ARE WITH LONGEVITY IN MIND. At DTT we compile your kits based on the trucks application. Street & Strip, Off-road performance trucks, towing trucks, Baja trucks, Sled Pulling trucks to name a few. Many of you have multipurpose vehicles and we consider that carefully. DTT Master kit contains a special designed 3rd gear Billet Piston. This unique Piston’s design affords larger surface area for better clutch apply. DTT custom piston design also offers an additional spring pocket resulting in even piston lifting in the 3rd gear drum. DTT ‘S Precision Builders STAGE 2 KIT : Includes CUSTOM DTT 3RD GEAR PISTON and precision ground pressure plate, clutches , steels, extensive high quality seal kit, 2nd gear band , pump bushing, drum bushing, 4.4 ratio lever, billet accumulator and custom triple seal Teflon ring Servo with HD spring.*picture not exactly as shown*

ALL MASTERKITS HAVE A $ 20 - 3RD GEAR PRESSURE PLATE CORE CHARGE / ANY PLATES RETURNED MUST HAVE A TRACKING & PROOF OF DELIVERY
   
 
1 2

Copyright ©  DTT Diesel Performance. All Rights Reserved. Built with Volusion